Electronic Thermostat ET 011
Share:
- 16 Amp DC switching capacity
- Low hysteresis
- Wide adjustment range
- DIN rail mountable
The ET 011 is an electronic thermostat for regulating high performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (changeover) contact.
A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical
thermostats.
| Switching difference | approx. 5.4 °F ± 1.8 °F tolerance (3 K ± 1 K) |
| Sensor element | PTC |
| Contact type | SPDT / change-over contact |
| Service life | > 100,000 cycles |
| Max. switching capacity | 16 A @ DC 28 V |
| Connection | 5-pole terminal, clamping torque 0.5 Nm max.: |
| solid wire - AWG 14 max. (2.5 mm²) | |
| stranded wire (w/ wire end ferrule) - AWG 16 max. (1.5 mm²) | |
| Housing | plastic, UL 94V-0, light grey |
| Mounting | clip for 35 mm DIN rail, EN 60715 |
| Mounting position | vertical |
| Operating temperature | +32 to +140 °F (0 to +60 °C) |
| Storage temperature | -49 to +176 °F (-45 to +80 °C) |
| Dimensions | 2.6 x 2.0 x 1.8” (67 x 50 x 46 mm) |
| Weight | approx. 2.8 oz. (80 g) |
| Protection type | IP20 |
Inquiry - Electronic Thermostat ET 011
View more
Thermostat
