Touch-safe Heater CSF 060
● Low surgace temperature
● Quick mounting due to clip fixing
● Doble insulated(plastic)
● Wide ovltage range
● Small size
● Integrated thermostat
Touch-safe heater for the use in enclosures with electrical/electronical components.
The design of the heater supports the natural convection which results in a high air-current of warm air.
The surface temperatures on the accessible side surfaces of he housing are kept down as a result of the heater design.
This model with plug-inthermostat does not require additional wiring.
The heaters are designed for perm-anent operation.
This heater is also available in a version without thermostat (CS 060).
Technical Data
Operating voltage | 120-240V AC/DC* (min. 110V, max. 265V) |
Heating capacity | See table |
Heater element | PTC resistor-temperature limiting |
Surface temperature | <80 °C(176 °F),except upper protective grille |
Connection | 4-pole terminal 2.5mm2, torpue 0.8Nm max. |
Casing | Plastic according to UL94-V-0, black |
Mounting | Clip for 35mm DIN rail, EN 50022 |
Fitting position | Vertical |
Operating/Storage temperature | -20 to +70 °C (-4 to +158 °F) / -45 to +70 °C (-49 to +158 °F) |
Protection type/Protection class | IP20 / II (double insulated) |
Accessoires | VDE+UL File No.E15057 (according to UL499 in combination with UL508A) |
Note | Other voltages on request |
Art. No. |
Heating capacity |
Inrush current max. |
Air outlet temperature |
Switch-off temperature | Dimensions | Weight (approx.) |
06001.0-00 | 50W | 2.5A | +86℃(186.8oF) | +15℃(59oF) | 110×60×90mm | 0.3kg |
06002.0-00 | 50W | 2.5A | +86℃(186.8oF) | +25℃(77oF) | 110×60×90mm | 0.3kg |
06011.0-00 | 100W | 4.5A | +120℃(248oF) | +15℃(59oF) | 110×60×90mm | 0.3kg |
06012.0-00 | 100W | 4.5A | +120℃(248oF) | +25℃(77oF) | 110×60×90mm | 0.3kg |
06021.0-00 | 150W | 8A | +145℃(293oF) | +15℃(59oF) | 150×60×90mm | 0.5kg |
06022.0-00 | 150W | 8A | +145℃(293oF) | +25℃(77oF) | 150×60×90mm | 0.5kg |
Inquiry - Touch-safe Heater CSF 060