Semiconductor Heater HG 040 (1)

Semiconductor Heater HG 040 (1)

Share:


Semiconductor Heater HG 040 (1)

RM483.87



  • Pressure clamp connectors
  • Dynamic heating up
  • Wide voltage range
  • Energy saving
  • Clip fixing
  • Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify installation.

Technical Data


Operating voltage 120-240V AC/DC¹ (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wireend ferrule) and rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Approvals  
Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
Note other voltages on request
¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Art. No. Heating capacity² Inrush current max. Pre-fuse T (time-delay) Length (L) Weight (approx.)
14000.0-00 15W 1.5A 1A 65mm 0.3kg
14001.0-00 30W 3.0A 2.5A 65mm 0.3kg
14003.0-00 45W 3.5A 2.5A 65mm 0.3kg
14005.0-00 60W 2.5A 2.5A 140mm 0.4kg
14006.0-00 75W 4.0A 4A 140mm 0.5kg
14007.0-00 100W 4.5A 4A 140mm 0.5kg
14008.0-00 150W 9.0A 6.3A 220mm 0.7kg
² at +20°C (+68°F) ambient temperature

Technical drawing




 Inquiry - Semiconductor Heater HG 040 (1)