Fan Heater CR 130

Fan Heater CR 130

Share:


Fan Heater CR 130

RM3,000.00



Compact high-performance Fan Heater CR 130 950W
  • Compact design
  • Double insulated
  • Integrated thermostat or hygrostat
  • Optional clip or screw fixing
The fan heater is available with integrated thermostat or pre-set hygrostat for temperature or humidity control
The CR 030 was designed as a stationary unit for the bottom of the enclosure.
For wall fixing the fan heater CR 130 is recommended.

Technical Data


Heating element High performance cartridge
Temperature safety cut-out to protect against overheating in case of fan failure,automatic reset
Heater body Extruded aluminium profile
Axial fan, ball bearing Airflow 160m3/h, free flow,service life 50,000h at25°C(77°F)
Connection 2-pole max. 2.5mm², clamping screw with strain relief, torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting Clip for 35mm Din rai, EN 50022, Screw fixing (M6)
Fitting position Hhorizontal
Dimensions 182 x 160 x 99mm
Weight Approx. 1.45kg
Operating / Storage temperature -45 to +70°C (-49 to +158°F)
Protection type / Protection class IP20 / II (double insulated)
Note Other heating capacities from 200W up available on request
Operating temperature of heater with integrated hygrostat: 0 to +60°C(+32 to +140°F)

Art. No. Model Operating voltage Heating capacity Setting range
13051.0-00 Fan Heater with thermostat 230VAC, 50/60Hz 950W 0 to +60°C
13051.0-02 Fan Heater with hygrostat 230VAC, 50/60Hz 950W 65% RH, factory-set
13059.9-00 Fan Heater with thermostat 120VAC, 50/60Hz 950W +32 to + 140°C
According to UL499 in combination with UL508A


 Inquiry - Fan Heater CR 130