Winston Electric
1275, Batu 8,
Jalan Bukit Kemuning,
Sec 32, 40460 Shah Alam,
Selangor, Malaysia.
+603-5121 6626
+6019-818 6698

LPF-100W

Previous 5 / 9 Next

LPF-100W Others Power Supply Switch Power Supply


Features:
·Universal AC input range/Full range
·Built-in active PFC function
·Protections: Short circuit / Over load/Over voltage/Over temperature
·Cooling by free air convection
·Class II power unit
·IP67 design for indoor or outdoor installations
·Suitable for LED lighting and moving sign applications
·Compliance to worldwide safety regulations for lighting
·Suitable for dry / damp / wet locations
·3 years warranty


Model LPF-100-2750 LPF-100-1750 LPF-100-1400
 
 
Output
DC voltage 36V 58V 72V
Constant current region 21.6~36V 34.8~58V 43.2~72V
Rated current 2750mA 1750mA 1400mA
Rated  power 99W 101.5W 100.8W
Ripple&noise (max.) 3.4Vp-p 5.5Vp-p 6.8Vp-p
Voltage tolerance ±5.0%
Current  tolerance ±5.0%
Line  regulation ±3.0%
Load  regulation ±5.0%
Setup time 1200ms/115VAC,500ms/230VAC(Full load)
      Input Voltage range 90264VAC 4763Hz127370VDC
AC current Typ. 0.8A/115VAC    0.4A/230VAC
Efficiency 88% 90% 91%
Power factor PF>0.9/230VAC ,PF0.92/115VAC(at full load)
Inrush current Cold start current 40A/230VAC
Leakage current 0.75mA/240VAC
 
Protection
Overload 95~110%  rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Over voltage 42~ 46.6V 66~ 78V 82~ 95V
Protection type : Shut down o/p voltage, re-power on to recover
Short circuit Hiccup mode, recovers automatically after fault condition is removed
Over temperature 90±10(RTH2)
Protection type : Shut down o/p voltage, re-power on to recover
Environment Working temp, humidity -30桫+50,20%~90%RH  non-condensing
Storage temp,humidity -40~+80,10%~95%RH non-condensing
Temp. coefficient ±0.03%/ (0 ~ 50)
Vibration   10~500HZ,2G 10min/1cycle,period for 60min, X.Y.Z each axes
 
Safety&EMC
Safety standard UL8750, TUV EN61347-1,EN61347-2-13UL60950-1,IP67  Certificated
Withstand voltage I/P-O/P3KVAC ,I/P-FG:1.5KVAC,O/P-FG:0.5KVAC 
Isolation resistance I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH
EMC interference Compliance to EN55015,EN61000-3-2 Class C(≥65% Load)
EMC emission Compliance to EN61000-3-2  Class C(≥75% Load); EN61000-3-3
EMC immunity Compliance to EN61000-4-2 ,3,4,5,6,8,11; ENV50204,EN55024,EN61547,light industry level (surge 4KV),  criteria B
Others MTBF 420K hrs min. MIL-HDBK-217F (25)
Dimension 204*49*34mm(L*W*H)
Packing 0.62kg/30pcs/19.5kg/0.027 m³/0.95CUFT
 
NOTE:
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25  of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4.. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.
5.Derating may be needed under low input voltage. Please check the static characteristics for more details.
6.Setup time is measured at cold start condition. Turning ON/OFF the power supply frequently may  increase  the set up time.
7.The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will
be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   


You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version