LPV-12E
Share:
Features:·Constant voltage style power supply
·Universal AC input range
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage/over temp
·Cooling by free air convection
·Fully encapsulated with IP67 level
·100% full load burn-in test
·3 Years warranty
NOTE:
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation
·Universal AC input range
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage/over temp
·Cooling by free air convection
·Fully encapsulated with IP67 level
·100% full load burn-in test
·3 Years warranty
| Model | LPV-12E-12 | LPV-12E-24 | LPV-12E-36 | |
|
output |
DC voltage | 12V | 24V | 36V |
| Voltage tolerance | ±1% | ±1% | ±1% | |
| Rated current | 1A | 0.5A | 0.33A | |
| Current range | 0~1A | 0~0.5A | 0~0.33A | |
| Rated power | 12W | 12W | 11.9W | |
| Ripple&noise | 120mvp-p | 150mvp-p | 150mvp-p | |
|
input |
Voltage range | 90~264VAC，235~373VDC | ||
| Frequency | 47~63HZ | |||
| AC current | 0.1A/230VAC | |||
| Efficiency | 78% | 80% | 82% | |
| Inrush current | Cold start current 30A/230VAC | |||
| Leakage current | <0.5mA/240VAC | |||
| protection | Over load | Rated output power 105%~135%start over load protection | ||
| Protection type:hiccup mode，auto-recovery after fault condition is removed | ||||
| Over voltage | 15.6~17.8V | 30.6~33.2V | 42.6~44.2V | |
| Protection type:hiccup mode，auto-recovery after fault condition is removed | ||||
| Over temperature | when temperature of transistor inner node is over150℃，start over temperature protection | |||
| Protection mode:cutoff output，auto-recovery after temperature become normal | ||||
| environment | Workingtemp,humidity | -10℃~+60℃，20%~90%RH | ||
| Storage temp.humidity | -20℃~+85℃，10%~95%RH non condensing | |||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，period for 60minutes，each axes | |||
| safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
| Isolated resistance | I/P-O/P、I/P-FG、O/P-FG:100Mohms/500VDC | |||
|
Fits tandard |
Safety standard | Fit UL1012，IP67 protect level | ||
| EMC standard | Fit EN55022，CLASSA | |||
| Others | Dimension | 97*30*22mm(L*W*H) | ||
| Weight/packing | 0.113kg/120pcs/13.5kg/0.027m³/0.95CUFT | |||
NOTE:
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation
Inquiry - LPV-12E
view more about
LPV Series Power Supply
